UL listed 12V UCS7604 RGBW 60 leds pixel strip with redundant data line

12V UCS7604 digital RGBW 60 Leds pixel strip

1. This strip is 12V UCS7604 4 channel RGBW 60 led digital strips that different with normal SPI UCS2904 RGBW even UCS8904 led pixel strips. Actually the protocol is different with the UCS2904 or UCS8904 RGBW led tapes, that means you couldn't choose the same controller to run this UCS7604 IC chip.
2. UCS7604 RGBW pixel led strips have following advantages that digital RGBW led pixel strips DO NOT have.​
   • There are 8 bits, 12 bits, 14 bits and 16 bits to choose. Before to run the UCS7604 chip, better to confirm the bit setting in the controller. Like the XB-100 controller play the UCS7604 chip is 12 bits. 
   • With redundant data line, break channels continue function to reduces chance of entire strip failure. 
   • Super High PWM rate 16,000KHZ allows for filming the pixels with 500fps appromately.
   • Built-in gamma correction enhances LED output to 16 bits, making colors more accurate and dimming curves more smooth.

3. Entire one meter strip has 20 pixels ( 80 channels), 60 pcs RGBW leds on 12mm width pcb board.

4. There are Warmer white 2300K, Warm white 2700K, Neutral White 4300K, Cold white 6500K white CCT to choose.

5. UCS7604 is 16 bits dimming, 65536 colors. 

6. The current output of the led pixels can be adjust, normally is 17mA. Do not recommend to be higher than 25mA. 

7. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.

8. 12V 20 pixels RGBW LED digital pixel tape is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.