1. SPI / DMX512 TTL SPI signal Amplifier
2. Support almost every kind of one-wire or two-wires LED driver IC
3. Support setting pixel number and segment numbers based on the Main controller
4. DC5V~24V wide range working voltage, reverse power supply input protection
5.This Signal Amplifier control model is depends on the main controller
6.It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc
Color
Protocol
1. This SPI / DMX512 signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.
2. It can output 8 channels for addressable LED strip with single data wire, such as WS2812B, WS2811, SK6812RGB, SK6812-RGBW,UCS2904, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as GS8208, WS2815.
3. DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.
4. Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller,etc.
5. This Signal Amplifier control the IC chip version like SK6812 or DMX512 , pixels qty, RGB color sequence, program modles are all based on the Main controller.
6. The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your LED lights. If your lights need 5V input, please use a 5V power supply, don't use higher than 5V power supply
7. The current through the amplifier is limited, when the consumption current is higher, you need to add power supply of the corresponding voltage additionally.
