12V Addressable 90Leds RGB pixel led tape

Individually address 12V RGB 90 Pixel LED Digital Strip

1. This is our first 90 pixels individually address LED strip, especially for the 12V version.
2. We still choose GS8208 RGB LED instead of WS2815 RGB LED to make it. 
3. GS8208 RGB LED provide double signal data input as redundant control, which ensures the transmission of the signal if any single chip damages. 
4. This 12V addressable RGB 90 pixels led strip is SPI signal.Compared to the tranditional 5V addressable RGB led strips, there are differences below we should clearly..
   • two-signal SPI could avoid RGB LEDs color influenced by the failure of one light in serial connection.
   • It is Individually address to control by 12V driver. 
   • 8bit SPI signal, with 12-bit built-in gamma correction. 256 grayscale.
   • Previous GS8208 LED version have demo inside that no need controller. The latest GS8208 RGB led version is without demo inside.
   • With high PWM rate allows for filming these pixels with cameras up to 267fps which is much higher than the WS2815 series that only 67fps.
   • Redundant data line reduces chance of entire strip failure.
   • The GS8208 RGB LED chips are wired internally in series, so for each channel output current is same with the current output per LED that is appromately 11mA.
5. Except ths 90 pixels 12V addressasble RGB led strip to choose, there are 30-60-144 pixels are available to offer.
6. Widely used in entertainment, stage,live performance like 3D effects and TV shows, etc. 
7. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.
8. 12V GS8208 RGB 90 pixels led tape is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.