DMX512-RDM online pixel controller

Led Controller Leave a comment 61 Views

1. Controller output is based on standard DMX512-A protocol, fully supports standard RDM technology standard protocol


2. With the standard RDM protocol lamps can be real-time pixels working status monitoring


3. MR-228R supports unlimited cascade transmission, without any cascade quantity limit


4. Support to open and close the write DMX address and parameter function
the controller can automatically detect, and the software visually displays the connection state


5.Support for monochrome, dual color, RGB, RGBW, RGBWY, and multi-color hybrid
control

Protocol

DMX512

More Details.

MR-228R DMX512-RDM online pixel controller

  1. With the standard RDM (remote equipment management) protocol lamps can be real-time status monitoring:
    • Support remote read and write (search discovery) RDM device unique UID
    • Supports UID modification of DMX addresses 
    • Supports reading back the RDM device firmware version number
    • Support for real-time temperature monitoring
    • Support the real-time monitoring of the current
    • Support for real-time voltage monitoring
    • Support the online monitoring and running time of pixels 
    • Support the real-time lamp fault error reporting, and shield the fault pixels
    • Support the real-time monitoring of the communication status of the
      pixels
  2. MR-228R supports unlimited cascade transmission, without any cascade quantity limit;                                                    
  3. 32-65536 Gray scale 16Bit conventional control, depth optimization up to 262144 gray scale, can truly restore the image color and details; 
  4. 8-port output, single-port output standard 512 channel, expansion protocol with load points tested by customers according to the characteristics of the chip; 
  5. Support dual backup, a controller is broken or the network cable is broken display is not affected;
  6. Support anti-interference and leakage design between device ports, a single port interference or failure does not affect the work of other ports;
  7. The patented magnetic coupling full isolation scheme is adopted between the 8 ports, and supports two-way communication DMX / RDM; 
  8. Support the IP grouping function, use the switch parallel scheme, reduce the system cascade chain length, and improve the stability of the system;
  9. supports standard RDM protocol, the RDM controller identification is affixed on the lower right corner of the MR-228R controller, as shown in the figure below: