1. 24V UCS7604 RGBW 60 Leds pixel strip with redundant data line
2. DC24V, 19W/M
3. 12mm width White /Black FPCB
4. 6 leds per segment on 12mm width PCB board
5. 60pcs RGBW LED plus 10 pcs UCS7604 IC chip
6. 16 bits dimming curve
7. Current output adjustable
8. UL Listed
9. 3M adhesive tape on backside of non-waterproof tape
Color
Pixel
Protocol
Voltage
This strip is 24V UCS7604B RGBW 60 led digital strips with double data. Actually the protocol is different with the UCS2904 or UCS8904 RGBW led tapes, that means you couldn't choose the same controller to run this UCS7604 IC chip.Better to choose the controller that support 16 bits IC chip.
UCS7604 RGBW pixel led strips have following advantages that tranditional RGBW led pixel strips DO NOT have.
There are 8 bits, 12 bits, 14 bits and 16 bits to choose. Before to run the UCS7604 chip, better to confirm the bit setting in the controller. Like the controller named A28A can be setting itself online.
With redundant data line, break channels continue function to reduces chance of entire strip failure.
Super High PWM rate 16,000KHZ allows for filming the pixels with 500fps appromately.
Built-in gamma correction enhances LED output to 16 bits, making colors more accurate and dimming curves more smooth.
Entire one meter strip has 10 pixels ( 10 channels), 60 pcs RGBW leds on 12mm width pcb board.
There are Warmer white 2300K, Warm white 2700K, Neutral White 4300K, Day white 5500K , Cold white 6500K white CCT to choose.
UCS7604 is 16 bits dimming, 65536 colors.
The current output of the led pixels can be adjust, normally is 17mA. Do not recommend to be higher than 25mA.
The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.
24V UCS7604 RGBW LED digital pixel tape is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.
