1. Addressable APA102C SK9822 60 Pixel LED Digital Strip
2. DC5V, 14W/M
3. 10mm width White /Black FPCB
4. 3pin / 4pin JST-SM connector
5. 3M adhesive tape on backside of non-waterproof tape
6. Double signal wire with DATA ,CLOCK
7.Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet
Color
Pixel
Protocol
Voltage
1. These Addressable APA102C SK9822 60 Pixel LED Digital Strips are incredibly cool that each led is powered by a SK9822 led that enables them to be individually addressable.
2. SK9822 LEDs are 5050-sized LEDs with an embedded microcontroller inside which has double signal wire that we can push data much faster than with the SK6812 RGB ones protocol.
3. SK9822 LEDs have higher PWM refresh rates compared to the sk6812 RGB LEDs, and no specific timing requirements, making it much easier to control.
4. These SK9822 RGB LED is two separate data and clock signals out pin ,LEDs acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin.
5. The addressable SK9822 RGB 60 LED strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go.
6. If the SK9822 60 led strip does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
7. There not only have 30 pixels to 144 pixels RGB digital led tapes to choose, but also have sk9822 30-144 pixels addressable white led tapes to choose .
8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.
