12V 72 Leds DMX512 RGBW Pixel LED Digital Tape

12V DMX512 RGBW RGBWW Pixel 72 LED Digital Strip

1. 12V DMX512 RGBW led digital pixel strip is different with normal SPI led pixel strips. DMX512 RGBW led strip has in parallel signal.
2. DMX512 RGBW led pixel strip have following advantages that SPI led pixel strips do not have.
   • Parallel DMX512 signal could avoid RGBW LEDs color influenced by the failure of one light in serial connection.
   • 8bit DMX512 signal, 256 grayscale and 16 bit DMX512 signal, 65536 grayscale are available to choose depends on case.
   • Offer UCS512C4 IC chip or TM512AC IC chip
   • Offer Gama correction curve of 1.0 or Gama correction curve of 2.2
   • Presence of white LED allows for higher brightness and more color mixing options.
   • 4 colors LED allowing for tones that were previously hard to achieve with single RGB strip.
   • White and RGB can be independently controlled to allows us to create bolder and more vibrant colors than with RGB alone.
3. Entire one meter strip has 24 pixels ( 96 channels), 72 pcs RGBW leds on 15mm width pcb board.
4. This DMX512 RGBW IC chip is UCS512 C4 IC chip that is 485 TTL signal with A,B digital control interface. 
5. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.
6. UCS512 C4 DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.
7. When use our DMX address writer to mark the DMX addresses, no matter input end of strip or output end of strip, you can connect it to the DMX address writer to write the DMX512 address successfully.
8. UCS512 C4 series DMX RGBW led pixel tapes,32 leds to 120 leds DMX512 RGBW led strips are available. 
9. Widely used in entertainment, stage,live performance like 3D effects and TV shows, etc. 
10. 12V DMX512 RGBW 72 leds digital pixel tape is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.