5V 32 Pixels DMX512 RGBW Addressable Pixel LED Digital Strip

DMX512 LED Leave a comment 1375 Views

1. Addressable DMX512 RGBW RGBWW 32 Pixels LED Digital Tape


2. DC5V, 10W/M


3. 12mm width White / Black FPCB


4. Warm white 3000K, neutral white 4500K, Cool white 6500K to choose


5. 3M adhensive tape on backside of non-waterproof strip


6. Support K-1000C/ K-8000C/ YM-501 /DMX512,Artnet to control


7.Standard DMX512 Signal wire digital control interface A,B


8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc


Color

RGBW

Pixel

Addressable

Protocol

DMX512

Voltage

5V

More Details.

Individually addressable DMX512 RGBW Pixel 32 LED Digital Tape

  1. This is invidually address UCS512 C4 DMX512 RGBW LED strip.
  2. This DMX512 RGBW led digital pixel strip is different with normal SPI led pixel strips. DMX512 RGBW led strip has in parallel signal.
  3. DMX512 RGBW led pixel strip have following advantages that all SPI led pixel strips do not have.
    • Parallel DMX512 signal could avoid RGBW LEDs color influenced by the failure of one light in serial connection.
    • There are 8bit DMX512 signal, 256 grayscale and 16 bit DMX512 signal, 65536 grayscale to choose which based on the DMX512 IC model.
    • Offer UCS512C4 IC chip or TM512AC IC chip
    • Offer Gama correction curve of 1.0 or Gama correction curve of 2.2
    • Presence of white LED allows for higher brightness and more color mixing options.
    • 4 colors LED allowing for tones that were previously hard to achieve with single RGB strip.
    • White and RGB can be independently controlled to allows us to create bolder and more vibrant colors than with RGB alone.
  4. Entire one meter strip has 32 pixels ( 128 channels), 32 pcs RGBW leds on 12mm width pcb board.
  5. This DMX512 RGBW IC chip is UCS512 C4 IC chip that is 485 TTL signal with A,B digital control interface. 
  6. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.
  7. UCS512 C4 DMX512 RGBW led pixel tape strips DMX address need to be set via DMX address coder / controller.
  8. When use our DMX address writer to mark the DMX addresses, no matter input end of strip or output end of strip, you can connect it to the DMX address writer to write the DMX512 address successfully.
  9. Not only have 5V addressable DMX512 RGBW led strip, but also have 12V individually addressable DMX512 RGBW LED tape.
  10. Widely used in entertainment, stage,live performance like 3D effects and TV shows, etc. 
  11. If this 5V individually addressable DMX512 RGBW pixel led strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
  12. Individually DMX512 RGBW 32 leds digital pixel strip is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.